σU
MPa
σ0.2
MPa
ϵL
KVL
J

1.4606 (X5NiCrTiMoVB25-15-2)

Classification

Country	Section	Category
Country	Section	Category
Germany	Stainless and Heat Resisting Steels	Chemical Resistant and High Temp Ni Alloys

Chemical composition

Standard	Fe, %	Si, %	B, %	Mn, %	Cr, %	Ti, %	Ni, %	Al, %	P, %	C, %	S, %	Mo, %
Standard	Fe, %	Si, %	B, %	Mn, %	Cr, %	Ti, %	Ni, %	Al, %	P, %	C, %	S, %	Mo, %
	49.72–59.099	< 1	0.001–0.01	1–2	13–16	1.9–2.3	24–27	< 0.35	< 0.025	< 0.08	< 0.015	1–1.5

Information on suppliers

Wish to advertise here?

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{0.2}$ , $MPa$	$\epsilon_L$ , %	$KV_{L}$ , $J$	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{0.2}$ , $MPa$	$\epsilon_L$ , %	$KV_{L}$ , $J$	Treatment
				solution annealing	700	250	35
				aging	880–1150	550	20		Heat treatment at 880 ° C
				aging				40

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
		solution annealing	212

Analogues

USA	CIS, Russia, Ukraine
USA	CIS, Russia, Ukraine
AL 286	X6NiCrTiMoVB25-15-2

Standards

Standard	Description
Standard	Description
DIN EN 10088-1:2014
DIN EN 10088-3:2014
ASME SA / EN 10088-3

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
B	%	Bor
Mn	%	Manganese
Cr	%	Chrome
Ti	%	Titan
Ni	%	Nickel
Al	%	Aluminium
P	%	Phosphorus
C	%	Carbon
S	%	Sulfur
Mo	%	Molybdenum

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma_{0.2}$	$MPa$	Tensile stress required to produce a total elongation of 0.2%
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_L$	%	Elongation at break (longitudinal)
$KV_{L}$	$J$	Impact energy (longitudinal)