07H18N9L (5H18N9L)

for details, heat-resistant up to 750 degrees. FROM; resistant to intergranular corrosion

Classification

Country Section Category
CIS, Russia, Ukraine Steels and alloys for castings Steel for casting with special properties

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Cu, % Ni, % P, % C, % S, %
GOST 977-88 65.565–73.8 0.2–1 1–2 17–20 < 0.3 8–11 < 0.035 < 0.07 < 0.03

Information on suppliers

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}, MPa \sigma_{P}, MPa \epsilon_L, % \psi, % KCU\cdot 10^{3}, \frac{J}{m^2} Treatment
Castings 450 180 25 35 1000 Hardening of 1050-1100 ° C, air cooling

Analogues

USA Germany
J92730 1.4308 (GX5CrNi19-10)

Standards

Standard Description
GOST 977-88

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Cu % Copper
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur

Description of mechanical properties

Parameter Units of measurement Description
\sigma _{U} MPa Ultimate tensile strength
\sigma_{P} MPa Proportionality limit
\epsilon_L % Elongation at break (longitudinal)
\psi % Reduction in cross section on fracture
KCU\cdot 10^{3} \frac{J}{m^2} Impact toughness