12H8VF (1H8VF)

Tube furnaces, vehicles and communications refineries, long operating at temperatures up to 500 ° C

Classification

Country Section Category
CIS, Russia, Ukraine Heat resistant steels and alloys Heat resistant high alloy steel

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ni, % V, % P, % C, % S, % W, %
GOST 20072-74 88.095–92.02 < 0.6 < 0.5 7–8.5 < 0.6 0.3–0.5 < 0.03 0.08–0.15 < 0.025 0.6–1

Information on suppliers

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{P}$$, $$MPa$$ $$\epsilon_L$$, % $$\psi$$, % $$KCU\cdot 10^{3}$$, $$\frac{J}{m^2}$$ Treatment
Pipes are hot deformed. GOST 550-75 392 167 22 50 980
Rod GOST 20072-74 390 165 22 50 980 Annealing 840-860 ° C, the furnace

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Alloy GOST 20072-74 annealing, hot rolling 217
Pipes are hot deformed. GOST 550-75 1700

Standards

Standard Description
GOST 20072-74

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ni % Nickel
V % Vanadium
P % Phosphorus
C % Carbon
S % Sulfur
W % Tungsten

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\sigma_{P}$$ $$MPa$$ Proportionality limit
$$\epsilon_L$$ % Elongation at break (longitudinal)
$$\psi$$ % Reduction in cross section on fracture
$$KCU\cdot 10^{3}$$ $$\frac{J}{m^2}$$ Impact toughness