15HGN2TA (15HGNTA)
Ring gears, connecting rods, gears, etc.
Ring gears, connecting rods, gears, etc.
Standard | Fe, % | Si, % | Mn, % | Cr, % | Ti, % | Cu, % | Ni, % | P, % | C, % | S, % |
---|---|---|---|---|---|---|---|---|---|---|
Standard | Fe, % | Si, % | Mn, % | Cr, % | Ti, % | Cu, % | Ni, % | P, % | C, % | S, % |
GOST 4543-71 | 95.21–96.87 | 0.17–0.37 | 0.7–1 | 0.7–1 | 0.03–0.09 | < 0.3 | 1.4–1.8 | < 0.025 | 0.13–0.18 | < 0.025 |
Rolling | Standard | Size, mm | Tension | Classifiers | \sigma _{U}, MPa | \sigma_{P}, MPa | \epsilon_L, % | \psi, % | KCU\cdot 10^{3}, \frac{J}{m^2} | Treatment |
---|---|---|---|---|---|---|---|---|---|---|
Rolling | Standard | Size, mm | Tension | Classifiers | \sigma _{U}, MPa | \sigma_{P}, MPa | \epsilon_L, % | \psi, % | KCU\cdot 10^{3}, \frac{J}{m^2} | Treatment |
Rod | GOST 4543-71 | 15 | 930 | 735 | 11 | 55 | 980 | Tempering 960-840 ° C, oil, leave 180 ° C, air |
Rolling | Standard | Classifiers | Value, HBW |
---|---|---|---|
Rolling | Standard | Classifiers | Value, HBW |
Alloy | GOST 4543-71 | annealing | 269 |
Standard | Description |
---|---|
Standard | Description |
GOST 4543-71 |
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
\sigma _{U} | MPa | Ultimate tensile strength |
\sigma_{P} | MPa | Proportionality limit |
\epsilon_L | % | Elongation at break (longitudinal) |
\psi | % | Reduction in cross section on fracture |
KCU\cdot 10^{3} | \frac{J}{m^2} | Impact toughness |