Mg96

production of ingots intended for melting in ingots, alloy production, etc.

Classification

Country Section Category
CIS, Russia, Ukraine Magnesium Primary magnesium

Chemical composition

Standard Fe, % Si, % Mg, % Mn, % Cu, % Ni, % Al, % Na, %
GOST 804-93 < 0.004 < 0.004 < 99.96 < 0.004 < 0.002 < 0.002 < 0.006 < 0.01

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 45 1740 0.047
100 26

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
Alloy Cast 85–130 3–6
Alloy deformation 250 8–10
Alloy annealing 180 15–17

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Alloy Cast 0–0
Alloy deformation 0–0
Alloy annealing 0–0

Casting and technological parameters

melting point, °C
651

Standards

Standard Description
GOST 804-93

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mg % Magnesium
Mn % Manganese
Cu % Copper
Ni % Nickel
Al % Aluminium
Na % Sodium

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point °C The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa