EP630U (42XHM)
Classification
Information on suppliers
Physical characteristics
Mechanical properties at 20 °C
Rolling | Standard | Size, mm | Tension | Classifiers | $$\sigma _{U}$$, $$MPa$$ | $$\sigma_{Y}$$, $$MPa$$ | δ, % | Treatment |
---|---|---|---|---|---|---|---|---|
Rolling | Standard | Size, mm | Tension | Classifiers | $$\sigma _{U}$$, $$MPa$$ | $$\sigma_{Y}$$, $$MPa$$ | δ, % | Treatment |
Round | GOST 5632-14 | 40 | Transverse | raw, hot rolling, fat, Transverse | 540–740 | 245–440 | > 30 |
Brinell hardness number
Rolling | Standard | Classifiers | Value, HBW |
---|---|---|---|
Rolling | Standard | Classifiers | Value, HBW |
Round | GOST 5632-14 | raw, hot rolling, fat | 230–270 |
Technological Properties
Limit operating modes
Standard | Температура, °C |
---|---|
Standard | Температура, °C |
GOST 5632-14 | > 500 |
Heat Treatment Modes
Properties
Description of physical characteristics
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
Cp | Дж/кг·К | Specific heat of material |
$$\alpha\cdot 10^{6}$$ | $$K^{-1}$$ | Coefficient of thermal (linear) expansion (range 20°C–T) |
$$\varkappa$$ | $$\frac{W}{m\cdot K}$$ | Coefficient of thermal conductivity (the heat capacity of the material) |
$$\rho$$ | $$\frac{kg}{m^3}$$ | The density of the material |
Description of mechanical properties
Designation of types of weldability
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
no limits | Welding is performed without heating and without subsequent heat treatment | |
Boundedly welded | Welding is possible with heating up to 100–120 °C and subsequent heat treatment | |
Difficult to weld | For obtaining quality welded joints, additional operations are required: heating up to 200–300 °C for welding, heat treatment after welding — annealing | |
Not applicable for welded structures |