St-06H14
Welding wire cold drawn alloy steel welding (surfacing), and the manufacture of electrodes
Classification
| Country | Section | Category |
|---|---|---|
| CIS, Russia, Ukraine | Materials for welding and soldering | Steel welding wire |
Chemical composition
| Standard | Fe, % | Si, % | Mn, % | Cr, % | Ni, % | P, % | C, % | S, % |
|---|---|---|---|---|---|---|---|---|
| GOST 2246-70 | 82.865–86.4 | 0.3–0.7 | 0.3–0.7 | 13–15 | < 0.6 | < 0.03 | < 0.08 | < 0.025 |
Information on suppliers
Eigenschaften
| Eigenschaft |
|---|
| Hinweis Schwankungen der Zugfestigkeit in einer Drahtspule mit einem Durchmesser von mehr als 1,4 mm sollten 90 N / mm2 nicht überschreiten. |
| Zum Schweißen Durchmesser: 0,3 - 0,5 mm; Temporärer Widerstand: 890 - 1390 MPa |
| Durchmesser: 0,8 - 1,5 mm; Temporärer Widerstand: 890 - 1340 MPa |
| Durchmesser: 1,6 mm; Temporärer Widerstand: 890 - 1290 MPa |
| Durchmesser: 2 mm; Temporärer Widerstand: 790 - 1190 MPa |
| Durchmesser:> 2 mm; Temporärer Widerstand: 690 - 1040 MPa |
| Zur Herstellung von Elektroden Durchmesser: 1,6 mm; Temporärer Widerstand: 690 - 990 MPa |
| Durchmesser: 2 mm; Temporärer Widerstand: 690 - 990 M. |
| Durchmesser:> 2 mm; Temporärer Widerstand: 640 - 940 MPa |
| Dichte: 7,75 g / cm³ |
Analogues
| Germany | USA |
|---|---|
| 1.4009 | S41080 |
Standards
| Standard | Description |
|---|---|
| GOST 2246-70 |
Description of chemical elements
| Element | Units of measurement | Description |
|---|---|---|
| Fe | % | Iron |
| Si | % | Silicon |
| Mn | % | Manganese |
| Cr | % | Chrome |
| Ni | % | Nickel |
| P | % | Phosphorus |
| C | % | Carbon |
| S | % | Sulfur |