1.0211 (S215GSiT)
Classification
| Country |
Section |
Category |
| Germany |
Non-alloy Steels |
Other Structural Steels (Not Intended for Heat Treatment with Rm < 500 MPa) |
Chemical composition
| Standard |
Fe, % |
Si, % |
Mn, % |
P, % |
C, % |
S, % |
|---|
| DIN 2391 Part 2 |
> 98.97 |
< 0.3 |
< 0.55 |
< 0.04 |
< 0.1 |
< 0.04 |
Information on suppliers
Properties
| Property |
|---|
| According to DIN 2391 Part 2 Cold drawn (hard) (BK) tensile strength: > 430 MPa |
| According to DIN 2391 Part 2 Cold drawn (hard) (BK) elongation: > 8 % |
| According to DIN 2391 Part 2 Cold drawn (soft) (BKW) tensile strength: > 380 MPa |
| According to DIN 2391 Part 2 Cold drawn (soft) (BKW) elongation: > 12 % |
| According to DIN 2391 Part 2 Cold-drawn with strain relief (BKS) yield strength: > 280 MPa |
| According to DIN 2391 Part 2 Cold-drawn with strain relief (BKS) tensile strength: > 380 MPa |
| According to DIN 2391 Part 2 Cold-drawn with strain relief (BKS) elongation: > 16 % |
| According to DIN 2391 Part 2 After annealing (GBK) tensile strength: > 280 MPa |
| According to DIN 2391 Part 2 After annealing (GBK) elongation: > 30 % |
| According to DIN 2391 Part 2 After normalization (NBK) yield strength: > 215 MPa |
| According to DIN 2391 Part 2 After normalization (NBK) tensile strength: 290 - 420 MPa |
| According to DIN 2391 Part 2 After normalization (NBK) elongation: > 30 % |
| Density: 7.85 g/cm3 |
Analogues
Standards
Description of chemical elements
| Element |
Units of measurement |
Description |
| Fe |
% |
Iron |
| Si |
% |
Silicon |
| Mn |
% |
Manganese |
| P |
% |
Phosphorus |
| C |
% |
Carbon |
| S |
% |
Sulfur |