Standard | Fe, % | Si, % | Mn, % | Cr, % | Cu, % | Ni, % | V, % | Al, % | P, % | C, % | S, % | Nb, % | Mo, % | N, % |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EN 10222-4 | 96.94–99.38 | < 0.4 | 0.6–1.4 | < 0.3 | < 0.2 | < 0.3 | < 0.05 | 0.02–0.06 | < 0.025 | < 0.18 | < 0.015 | < 0.03 | < 0.08 | < 0.02 |
Standard | Description |
---|---|
EN 10222-4 |
Parameter | Units of measurement | Description |
---|---|---|
$$\sigma_{Y}$$ | $$MPa$$ | Yield strength |
$$\sigma _{U}$$ | $$MPa$$ | Ultimate tensile strength |
$$\epsilon_L$$ | % | Elongation at break (longitudinal) |
$$\epsilon_T$$ | % | Elongation at break (transverse) |
$$KV_{L}$$ | $$J$$ | Impact energy (longitudinal) |
$$KV_{T}$$ | $$J$$ | Impact energy (transverse) |