1.0601 (C60)

Classification

Country Section Category
Germany Non-alloy Steels Steels with Average C ≥ 0,55% or Rm ≥ 700 MPa

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ni, % P, % C, % S, % Mo, %
97.06–98.83 < 0.4 0.6–0.9 < 0.4 < 0.4 < 0.045 0.57–0.65 < 0.045 < 0.1

Information on suppliers

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}, MPa \sigma_{0.2}, MPa \epsilon_L, % \epsilon_{L (L_0 = 5.65\sqrt{S_o})}, % R_{eH}, MPa Treatment
< 16 normalization 710 10 380
16–100 normalization 670 11 340
100–250 normalization 650 11 310
250–500 normalization 630 275
500–1000 normalization 620 260
5–10 solid, cold drawn 800–1150 630 5
10–16 solid, cold drawn 780–1130 550 5
16–40 solid, cold drawn 730–1100 480 6

Brinell hardness number

Rolling Standard Classifiers Value, HBW
improved machinability 255
annealing, soft 241
rolling, turning 198–278

Analogues

CIS, Russia, Ukraine
60G

Standards

Standard Description
EN 10083-2
EN 10250-2

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum

Description of mechanical properties

Parameter Units of measurement Description
\sigma_{0.2} MPa Tensile stress required to produce a total elongation of 0.2%
\sigma _{U} MPa Ultimate tensile strength
\epsilon_L % Elongation at break (longitudinal)
\epsilon_{L (L_0 = 5.65\sqrt{S_o})} % Elongation at break (longitudinal) (for L0 = 5.65√So)
R_{eH} MPa Upper yield point