σU
MPa
σ0.2
MPa
ϵL(L0=80mm)

1.1211 (C60S)

Classification

Country	Section	Category
Country	Section	Category
Germany	Non-alloy Special Steels	Structural Pressure Vessel and Engineering Steels with C > = 0,5%

Chemical composition

Standard	Fe, %	Si, %	Mn, %	Cr, %	Ni, %	P, %	C, %	S, %	Mo, %
Standard	Fe, %	Si, %	Mn, %	Cr, %	Ni, %	P, %	C, %	S, %	Mo, %
EN 10132-4	97.15–98.68	0.15–0.35	0.6–0.9	< 0.4	< 0.4	< 0.025	0.57–0.65	< 0.025	< 0.1

Information on suppliers

Wish to advertise here?

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{0.2}$ , $MPa$	$\epsilon_{L (L_0 = 80 mm)}$ , %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{0.2}$ , $MPa$	$\epsilon_{L (L_0 = 80 mm)}$ , %	Treatment
		0.3–3		annealing, soft	620	495	17
		0.3–3		cold rolling	1100
		0.3–3		moderate hardening	1150–1750

Твёрдость по Викерсу

Rolling	Standard	Classifiers	Value, HV
Rolling	Standard	Classifiers	Value, HV
		annealing, soft	195
		cold rolling	305
		moderate hardening	345–530

Standards

Standard	Description
Standard	Description
EN 10132-4

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Mn	%	Manganese
Cr	%	Chrome
Ni	%	Nickel
P	%	Phosphorus
C	%	Carbon
S	%	Sulfur
Mo	%	Molybdenum

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma_{0.2}$	$MPa$	Tensile stress required to produce a total elongation of 0.2%
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_{L (L_0 = 80 mm)}$	%	Elongation at break (longitudinal) (for L₀ = 80 mm)