1.4469 (GX2CrNiMoN26-7-4)

Classification

Country Section Category
Germany Stainless and Heat Resisting Steels Stainless Steel with Ni > = 2.5% with Mo but without Nb and Ti

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Cu, % Ni, % P, % C, % S, % Mo, % N, %
56.39–65.88 < 1 < 1 25–27 < 1.3 6–8 < 0.035 < 0.03 < 0.025 3–5 0.12–0.22

Information on suppliers

Physical characteristics

Temperature, °C $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$
20 15 7700 0.45
100 13
300 14

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{0.2}$$, $$MPa$$ $$\epsilon_L$$, % $$KV_{L}$$, $$J$$ Treatment
solution annealing 650–850 480 22 50

Analogues

CIS, Russia, Ukraine USA
03Х24Н6АМ3Л Alloy 958

Standards

Standard Description
EN 10213-4
EN 10283
DIN EN 10213:2007 + A1:2016
DIN EN 10283:2010
DIN EN 10283:2019
DSTU GOST 10213:2016

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Cu % Copper
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum
N % Nitrogen

Description of physical characteristics

Parameter Units of measurement Description
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma_{0.2}$$ $$MPa$$ Tensile stress required to produce a total elongation of 0.2%
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)
$$KV_{L}$$ $$J$$ Impact energy (longitudinal)