1.4575 (X1CrNiMoNb28-4-2)

Classification

Country Section Category
Germany Stainless and Heat Resisting Steels Stainless Steels with Special Additions

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ni, % P, % C, % S, % Mo, % N, %
60.91–69.2 < 1 < 1 26–30 3–4.5 < 0.025 < 0.015 < 0.015 1.8–2.5 < 0.035

Information on suppliers

Physical characteristics

Temperature, °C E\cdot 10^{9}, MPa \alpha\cdot 10^{6}, K^{-1} \varkappa, \frac{W}{m\cdot K} \rho, \frac{kg}{m^3} c\cdot 10^{-3}, \frac{J}{kg\cdot K} R\cdot 10^{-6}, \Omega\cdot m
20 215 14.5 7700 0.4 0.8
100 9.5
200 10
300 10.5

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}, MPa \sigma_{0.2}, MPa \epsilon_L, % KU, J Treatment
600–750 < 500 < 20 > 45 hardening

Analogues

USA
Cronifer 2803 Mo

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum
N % Nitrogen

Description of physical characteristics

Parameter Units of measurement Description
E\cdot 10^{9} MPa Elastic modulus
\alpha\cdot 10^{6} K^{-1} Coefficient of thermal (linear) expansion (range 20°C–T)
\varkappa \frac{W}{m\cdot K} Coefficient of thermal conductivity (the heat capacity of the material)
\rho \frac{kg}{m^3} The density of the material
c\cdot 10^{-3} \frac{J}{kg\cdot K} The specific heat of the material (range 20°C–T)
R\cdot 10^{-6} \Omega\cdot m Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
\sigma_{0.2} MPa Tensile stress required to produce a total elongation of 0.2%
\sigma _{U} MPa Ultimate tensile strength
\epsilon_L % Elongation at break (longitudinal)
KU J Impact energy