1.4718 (X45CrSi9-3)

Classification

Country Section Category
Germany Stainless and Heat Resisting Steels Heat Resistant Steels with Ni < 2.5%

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ni, % P, % C, % S, %
EN 10090 85.03–88.9 2.7–3.3 < 0.6 8–10 < 0.5 < 0.04 0.4–0.5 < 0.03

Information on suppliers

Physical characteristics

Temperature, °C \alpha\cdot 10^{6}, K^{-1} \varkappa, \frac{W}{m\cdot K} \rho, \frac{kg}{m^3}
20 21 7700
100 12.9
300 13.2
500 13.6
700 14

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}, MPa \sigma_{0.2}, MPa \epsilon_L, % \psi, % Treatment
moderate hardening 900–1100 700 14
< 40 moderate hardening 40

Brinell hardness number

Rolling Standard Classifiers Value, HBW
moderate hardening 266–325
annealing, soft 300

Standards

Standard Description
EN 10090

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur

Description of physical characteristics

Parameter Units of measurement Description
\alpha\cdot 10^{6} K^{-1} Coefficient of thermal (linear) expansion (range 20°C–T)
\varkappa \frac{W}{m\cdot K} Coefficient of thermal conductivity (the heat capacity of the material)
\rho \frac{kg}{m^3} The density of the material

Description of mechanical properties

Parameter Units of measurement Description
\sigma_{0.2} MPa Tensile stress required to produce a total elongation of 0.2%
\sigma _{U} MPa Ultimate tensile strength
\epsilon_L % Elongation at break (longitudinal)
\psi % Reduction in cross section on fracture