1.4986 (X7CrNiMoBNb16-16)

Classification

Country Section Category
Germany Stainless and Heat Resisting Steels Materials with Elevated Temperature Properties

Chemical composition

Standard Fe, % Si, % B, % Mn, % Cr, % Ni, % P, % C, % S, % Mo, %
61.125–67.01 0.3–0.6 0.05–0.1 < 1 15.5–17.5 15.5–17.5 < 0.045 0.04–0.1 < 0.03 1.6–2

Information on suppliers

Physical characteristics

Temperature, °C $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 15 7900 0.46 0.86
100 16.6 16
200 17.7 17
300 17.9 19
400 17.9 19
500 17.9 21
600 18.1 22
700 18.3 24
800 18.6 25

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{0.2}$$, $$MPa$$ $$\epsilon_L$$, % $$KV_{L}$$, $$J$$ Treatment
heat 650–850 500 50
solution annealing 16

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
B % Bor
Mn % Manganese
Cr % Chrome
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum

Description of physical characteristics

Parameter Units of measurement Description
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma_{0.2}$$ $$MPa$$ Tensile stress required to produce a total elongation of 0.2%
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)
$$KV_{L}$$ $$J$$ Impact energy (longitudinal)