1.7016 (17Cr3)

Classification

Country	Section	Category
Country	Section	Category
Germany	Structural, Pressure Vessel and Engineering Steels	Cr, Cr-B

Chemical composition

Standard	Fe, %	Si, %	Mn, %	Cr, %	P, %	C, %	S, %
Standard	Fe, %	Si, %	Mn, %	Cr, %	P, %	C, %	S, %
	97.44–98.56	< 0.4	0.6–0.9	0.7–1	< 0.025	0.14–0.2	< 0.035

Information on suppliers

Wish to advertise here?

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{0.2}$ , $MPa$	$\epsilon_{L (L_0 = 80 mm)}$ , %	$\psi$ , %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{0.2}$ , $MPa$	$\epsilon_{L (L_0 = 80 mm)}$ , %	$\psi$ , %	Treatment
				annealing, soft	550	420	21
				annealing, solid, carbide spheroidization, cold drawn	620–630
								57–62

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
		annealing, soft	174
		specified strength, ferrite-pearlite composition	140–187

Твёрдость по Роквеллу

Rolling	Standard	Classifiers	Value, HRC
Rolling	Standard	Classifiers	Value, HRC
		annealing, soft	84

Твёрдость по Викерсу

Rolling	Standard	Classifiers	Value, HV
Rolling	Standard	Classifiers	Value, HV
		annealing, soft	170

Analogues

CIS, Russia, Ukraine
CIS, Russia, Ukraine
15X

Standards

Standard	Description
Standard	Description
EN 10084
EN 10132-2

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Mn	%	Manganese
Cr	%	Chrome
P	%	Phosphorus
C	%	Carbon
S	%	Sulfur

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma_{0.2}$	$MPa$	Tensile stress required to produce a total elongation of 0.2%
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_{L (L_0 = 80 mm)}$	%	Elongation at break (longitudinal) (for L₀ = 80 mm)
$\psi$	%	Reduction in cross section on fracture