1.7035 (41Cr4)

Classification

Country	Section	Category
Country	Section	Category
Germany	Structural, Pressure Vessel and Engineering Steels	Cr, Cr-B

Chemical composition

Standard	Fe, %	Si, %	Mn, %	Cr, %	P, %	C, %	S, %
Standard	Fe, %	Si, %	Mn, %	Cr, %	P, %	C, %	S, %
	96.99–98.12	< 0.4	0.6–0.9	0.9–1.2	< 0.025	0.38–0.45	< 0.035

Information on suppliers

Wish to advertise here?

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_{L (L_0 = 5.65\sqrt{S_o})}$ , %	$R_{eH}$ , $MPa$	$\psi$ , %	$KV_{L}$ , $J$	$KV_{T}$ , $J$	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_{L (L_0 = 5.65\sqrt{S_o})}$ , %	$R_{eH}$ , $MPa$	$\psi$ , %	$KV_{L}$ , $J$	$KV_{T}$ , $J$	Treatment
		< 16		moderate hardening	1000–1200	11	800	30	30–35	22
		16–40		moderate hardening	900–1100	12	660	35
		40–100		moderate hardening	800–950	14	560	40
				annealing, solid, carbide spheroidization, cold drawn	610			60
		< 8		moderate hardening	1000
		8–20		moderate hardening	900
		20–50		moderate hardening	800

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
		improved machinability	255
		annealing, soft	241

Analogues

CIS, Russia, Ukraine
CIS, Russia, Ukraine
45H

Standards

Standard	Description
Standard	Description
EN 10083-1
EN 10250-3

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Mn	%	Manganese
Cr	%	Chrome
P	%	Phosphorus
C	%	Carbon
S	%	Sulfur

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_{L (L_0 = 5.65\sqrt{S_o})}$	%	Elongation at break (longitudinal) (for L₀ = 5.65√So)
$R_{eH}$	$MPa$	Upper yield point
$\psi$	%	Reduction in cross section on fracture
$KV_{L}$	$J$	Impact energy (longitudinal)
$KV_{T}$	$J$	Impact energy (transverse)