1.8801 (S355G2 + N)

Classification

Country Section Category
Germany Structural, Pressure Vessel and Engineering Steels High Strength Weldable Steels not Intended for Heat Treatment by User

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ti, % Cu, % Ni, % V, % Al, % P, % C, % S, % Nb, % Mo, % N, %
EN 10225 96.09–99.1 < 0.5 0.9–1.65 < 0.3 < 0.03 < 0.35 < 0.5 < 0.12 < 0.02 < 0.035 < 0.2 < 0.03 < 0.06 < 0.1 < 0.015

Information on suppliers

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}, MPa \sigma_{Y}, MPa \epsilon_{L (L_0 = 5.65\sqrt{S_o})}, % KV_{L}, J Treatment
normalization 470–630 22 50
< 16 normalization 355
16–25 normalization 345

Standards

Standard Description
EN 10225

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ti % Titan
Cu % Copper
Ni % Nickel
V % Vanadium
Al % Aluminium
P % Phosphorus
C % Carbon
S % Sulfur
Nb % Niobium
Mo % Molybdenum
N % Nitrogen

Description of mechanical properties

Parameter Units of measurement Description
\sigma_{Y} MPa Yield strength
\sigma _{U} MPa Ultimate tensile strength
\epsilon_{L (L_0 = 5.65\sqrt{S_o})} % Elongation at break (longitudinal) (for L0 = 5.65√So)
KV_{L} J Impact energy (longitudinal)