1.8823 (S355M)

Classification

Country Section Category
Germany Structural, Pressure Vessel and Engineering Steels High Strength Weldable Steels not Intended for Heat Treatment by User

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ti, % Cu, % Ni, % V, % Al, % P, % C, % S, % Nb, % Mo, % N, % CEV, %
EN 10113-3 > 95.57 < 0.5 < 1.6 < 0.3 < 0.05 < 0.55 < 0.5 < 0.1 < 0.02 < 0.03 < 0.14 < 0.025 < 0.05 < 0.1 < 0.015 < 0.45

Information on suppliers

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{Y}$$, $$MPa$$ $$\epsilon_{L (L_0 = 5.65\sqrt{S_o})}$$, % $$KV_{L}$$, $$J$$ $$KV_{T}$$, $$J$$ Treatment
< 40 470–630 22 55 31
40–63 450–610 335
63–80 440–600 325
80–100 440–600 325
100–120 430–590 320
< 16 355
16–40 345

Standards

Standard Description
EN 10113-3

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ti % Titan
Cu % Copper
Ni % Nickel
V % Vanadium
Al % Aluminium
P % Phosphorus
C % Carbon
S % Sulfur
Nb % Niobium
Mo % Molybdenum
N % Nitrogen
CEV % Cerium

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma_{Y}$$ $$MPa$$ Yield strength
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_{L (L_0 = 5.65\sqrt{S_o})}$$ % Elongation at break (longitudinal) (for L0 = 5.65√So)
$$KV_{L}$$ $$J$$ Impact energy (longitudinal)
$$KV_{T}$$ $$J$$ Impact energy (transverse)