1.8838 (S460ML)

Classification

Country Section Category
Germany Structural, Pressure Vessel and Engineering Steels High Strength Weldable Steels not Intended for Heat Treatment by User

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ti, % Cu, % Ni, % V, % Al, % P, % C, % S, % Nb, % Mo, % N, % CEV, %
EN 10113-3 > 94.9 < 0.6 < 1.7 < 0.3 < 0.05 < 0.55 < 0.8 < 0.12 < 0.02 < 0.025 < 0.16 < 0.02 < 0.05 < 0.2 < 0.025 < 0.48

Information on suppliers

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}, MPa \sigma_{Y}, MPa \epsilon_{L (L_0 = 5.65\sqrt{S_o})}, % KV_{L}, J KV_{T}, J Treatment
< 40 540–720 17 63 40
40–63 530–710 430
63–80 510–690 410
80–100 500–680 400
100–120 490–660 385
< 16 460
16–40 440

Standards

Standard Description
EN 10113-3

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ti % Titan
Cu % Copper
Ni % Nickel
V % Vanadium
Al % Aluminium
P % Phosphorus
C % Carbon
S % Sulfur
Nb % Niobium
Mo % Molybdenum
N % Nitrogen
CEV % Cerium

Description of mechanical properties

Parameter Units of measurement Description
\sigma_{Y} MPa Yield strength
\sigma _{U} MPa Ultimate tensile strength
\epsilon_{L (L_0 = 5.65\sqrt{S_o})} % Elongation at break (longitudinal) (for L0 = 5.65√So)
KV_{L} J Impact energy (longitudinal)
KV_{T} J Impact energy (transverse)