2.4983 (NiCr18Co)

Classification

Country Section Category
Germany Alloy DIN 17007−4 Ni Alloys with Co, Cr and Mo Co Alloys with Cr, Ni and Mo

Chemical composition

Standard Fe, % Si, % Mn, % Co, % Cr, % Ti, % Ni, % Al, % P, % C, % S, % Mo, %
< 4 < 0.5 < 1 17–20 17–20 2.5–3.2 42.92–58 2.5–3.2 < 0.02 < 0.15 < 0.01 3–5

Information on suppliers

Physical characteristics

Temperature, °C $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 13 8100 0.46 1.15
100 11.3 12
200 12 13
300 12.4 15
400 12.8 16
500 13.1 17
600 13.7 19
700 14.3 20
800 14.9 21
900 16.1

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{0.2}$$, $$MPa$$ $$\epsilon_L$$, % $$KU$$, $$J$$ Treatment
< 1320 < 785 < 15 > 21 After precipitation hardening

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Co % Cobalt
Cr % Chrome
Ti % Titan
Ni % Nickel
Al % Aluminium
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum

Description of physical characteristics

Parameter Units of measurement Description
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma_{0.2}$$ $$MPa$$ Tensile stress required to produce a total elongation of 0.2%
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)
$$KU$$ $$J$$ Impact energy