09G2D
Unalloyed high quality manganic steel with copper.
Metal car building construction
Unalloyed high quality manganic steel with copper.
Metal car building construction
Standard | Fe, % | Si, % | Mn, % | Cr, % | Cu, % | Ni, % | As, % | P, % | C, % | S, % | N, % |
---|---|---|---|---|---|---|---|---|---|---|---|
Standard | Fe, % | Si, % | Mn, % | Cr, % | Cu, % | Ni, % | As, % | P, % | C, % | S, % | N, % |
GOST 19281-89 | 96.643–98.28 | 0.17–0.37 | 1.4–1.8 | < 0.3 | 0.15–0.3 | < 0.3 | < 0.08 | < 0.035 | < 0.12 | < 0.04 | < 0.012 |
Rolling | Standard | Size, mm | Tension | Classifiers | Treatment | |||
---|---|---|---|---|---|---|---|---|
Rolling | Standard | Size, mm | Tension | Classifiers | Treatment | |||
Sheet | GOST 19282-73 | 5–9 | 450 | 310 | 21 | |||
Metal rolling | 4 | 450 | 21 |
Standard | Description |
---|---|
Standard | Description |
GOST 19281-89 |
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
no limits | Welding is performed without heating and without subsequent heat treatment | |
Boundedly welded | Welding is possible with heating up to 100–120 °C and subsequent heat treatment | |
Difficult to weld | For obtaining quality welded joints, additional operations are required: heating up to 200–300 °C for welding, heat treatment after welding — annealing | |
Not applicable for welded structures |