Cobalt 27KX alloy alloyed with nickel and chromium
For the manufacture of rotors and stators of electrical machines and other magnetic circuits operating at ordinary and high temperatures and under mechanical loads.
Classification
Country |
Section |
Category |
CIS, Russia, Ukraine |
Precision alloys |
Soft Magnetic Precision Alloys |
Chemical composition
Standard |
Si, % |
Mn, % |
Co, % |
Cr, % |
Ni, % |
P, % |
C, % |
S, % |
GOST 10994-74 |
< 0.25 |
0.2–0.4 |
26.5–28 |
0.3–0.6 |
< 0.3 |
< 0.015 |
< 0.04 |
< 0.015 |
Information on suppliers
Physical characteristics
Temperature, °C |
$$E\cdot 10^{9}$$, $$MPa$$ |
$$\alpha\cdot 10^{6}$$, $$K^{-1}$$ |
$$\rho$$, $$\frac{kg}{m^3}$$ |
$$R\cdot 10^{-6}$$, $$\Omega\cdot m$$ |
20 |
220 |
|
7980 |
0.2 |
100 |
|
10.7 |
|
|
Mechanical properties at 20 °C
Rolling |
Standard |
Size, mm |
Tension |
Classifiers |
$$\sigma _{U}$$, $$MPa$$ |
$$\sigma_{P}$$, $$MPa$$ |
$$\epsilon_L$$, % |
Treatment |
Tape |
|
|
|
|
590 |
295 |
20 |
|
Tape |
|
|
|
cold-work |
1080 |
|
2 |
|
Magnetic properties
Rolling |
$$H_c$$, $$A/m$$ |
$$\mu_{max}$$, $$MH/m$$ |
$$B_{1000}$$, $$T$$ |
Tape |
0.012–0.016 |
12000–14000 |
3300–3400 |
Brinell hardness number
Rolling |
Standard |
Classifiers |
Value, HBW |
Tape |
GOST 10994-74 |
raw, cold rolling, thin, Transverse |
210–220 |
Limit operating modes
Analogues
Russia |
USA |
Сплав ЭП685 |
Сплав Hiperco 27Alloy |
Standards
Description of chemical elements
Element |
Units of measurement |
Description |
Si |
% |
Silicon |
Mn |
% |
Manganese |
Co |
% |
Cobalt |
Cr |
% |
Chrome |
Ni |
% |
Nickel |
P |
% |
Phosphorus |
C |
% |
Carbon |
S |
% |
Sulfur |
Description of physical characteristics
Parameter |
Units of measurement |
Description |
$$E\cdot 10^{9}$$ |
$$MPa$$ |
Elastic modulus |
$$\alpha\cdot 10^{6}$$ |
$$K^{-1}$$ |
Coefficient of thermal (linear) expansion (range 20°C–T) |
$$\rho$$ |
$$\frac{kg}{m^3}$$ |
The density of the material |
$$R\cdot 10^{-6}$$ |
$$\Omega\cdot m$$ |
Electrical resistivity |
Description of mechanical properties
Parameter |
Units of measurement |
Description |
$$\sigma _{U}$$ |
$$MPa$$ |
Ultimate tensile strength |
$$\sigma_{P}$$ |
$$MPa$$ |
Proportionality limit |
$$\epsilon_L$$ |
% |
Elongation at break (longitudinal) |
Description of magnetic properties
Parameter |
Units of measurement |
Description |
$$H_c$$ |
$$A/m$$ |
Magnetic coercivity (not more) |
$$\mu_{max}$$ |
$$MH/m$$ |
Magnetic permeability (not more) |
$$B_{1000}$$ |
$$T$$ |
Magnetic induction (not less) in a magnetic field while magnetic field strength is 1000 A/m |