Alloy 34N2X

No foreign analogues

It is used in the manufacture of magnetic shunts, thermal relay parts and temperature sensors.

Classification

Country Section Category
CIS, Russia, Ukraine Precision alloys Soft Magnetic Precision Alloys

Chemical composition

Standard Fe, % Si, % Mg, % Ca, % Cr, % Cu, % Ni, % C, % S, %
GOST 10994-74 62.725–65.2 < 0.18 < 0.05 < 0.025 1.5–2.3 < 0.05 33.3–34.6 < 0.05 < 0.02

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$ Cp, Дж/кг·К
20 205 8200 850 450

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{Y}$$, $$MPa$$ d5, % Treatment
Tape GOST 10994-74 100 Transverse 400–450 110–130 30–40

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Tape GOST 10994-74 120–130

Casting and technological parameters

melting point, °C
1400

Limit operating modes

Standard Температура, °C
GOST 10994-74 < 100

Heat Treatment Modes

Treatment
Annealing

Standards

Standard Description
GOST 10994-74

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mg % Magnesium
Ca % Calcium
Cr % Chrome
Cu % Copper
Ni % Nickel
C % Carbon
S % Sulfur

Description of physical characteristics

Parameter Units of measurement Description
Cp Дж/кг·К Specific heat of material
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
d5 % Elongation at break
$$\sigma_{Y}$$ $$MPa$$ Yield strength
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point °C The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa