Nickel alloy with cobalt and chromium alloyed with molybdenum 35H32KXM

  • Chemical composition
Fe Iron <1.0
Co Cobalt 31.0 — 33.0
Si Silicon <0.15
Mn Manganese <0.15
Mo Molybdenum 9.0 — 10.5
Ni Nickel 33.0 — 37.0
S Sulfur <0.01
Ti Titanium <1.0
C Carbon <0.025
P Phosphorus <0.015
Cr Chromium 19.0 — 21.0

By agreement: Si + Mn <0.40

Analogs in Germany

MP 35 N

2.4999

Analogs in the USA

Allvac MP 35 N

MP 35 N Multiphase

Allvac 35 N

5758 E AMS

5844 D AMS

5845 D AMS

5758 F AMS

5844 E AMS

5845 E AMS

5758 AMS

5844 AMS

5845 AMS

AS7468 AMS

F 1636 (R 30035) ASTM F1636

F 2005 (R 30035) ASTM F2005

F 2068 (R 30035) ASTM F2068

F 2527 (R 30035) ASTM F2527

F 562 (R30035) ASTM F562

F 688 (R30035) ASTM F688

F 961 (R30035) ASTM F961

Carpenter MP35N Alloy Carpenter

MP35N Latrobe

MR0175 NACE

718 NACE Rolled Alloys

MP35N SPS

R30035 UNS

International equivalent — SY 35N ArcelorMittal

Production in Russia is carried out in accordance with the standards of GOST R 51396−99. The alloy is used for connecting force and implantable elements of products for the bones of the body.

Classification

Country Section Category
CIS, Russia, Ukraine Corrosion-resistant alloys and steels Corrosion-resistant alloys

Chemical composition

Standard Fe, % Si, % Mn, % Co, % Cr, % Ti, % Ni, % P, % C, % S, % Mo, %
GOST Р 51396 - 99 < 1 < 0.15 < 0.15 31–33 19–21 < 1 33.15–41 < 0.015 < 0.025 < 0.01 9–10.5

Information on suppliers

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{Y}$$, $$MPa$$ d5, % Treatment
Wire heat treatment. GOST 51396-99 800 300 40
The wire is half-worked. GOST 51396-99 1000 650 20
Wire is hardened. GOST 51396-99 1200 1000 10

Analogues

USA
Allvac MP 35 N

Standards

Standard Description
GOST Р 51396 - 99

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Co % Cobalt
Cr % Chrome
Ti % Titan
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum

Description of mechanical properties

Parameter Units of measurement Description
d5 % Elongation at break
$$\sigma_{Y}$$ $$MPa$$ Yield strength
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength