Nickel-iron alloy 36HX
for structures and pipelines operating at low temperatures; TKLR * 1,000,000 in the temperature range from -258 to +20 and from +20 to +100 ºC no more than 1.0−2.0 [1 / ºC]
for structures and pipelines operating at low temperatures; TKLR * 1,000,000 in the temperature range from -258 to +20 and from +20 to +100 ºC no more than 1.0−2.0 [1 / ºC]
Standard | Fe, % | Si, % | Mn, % | Cr, % | Cu, % | Ni, % | P, % | C, % | S, % |
---|---|---|---|---|---|---|---|---|---|
Standard | Fe, % | Si, % | Mn, % | Cr, % | Cu, % | Ni, % | P, % | C, % | S, % |
GOST 10994-74 | 61.17–64.3 | < 0.3 | 0.3–0.6 | 0.4–0.6 | < 0.25 | 35–37 | < 0.015 | < 0.05 | < 0.015 |
Standard | Description |
---|---|
Standard | Description |
GOST 10994-74 |
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
\sigma _{U} | MPa | Ultimate tensile strength |
\sigma_{P} | MPa | Proportionality limit |
\epsilon_L | % | Elongation at break (longitudinal) |
\psi | % | Reduction in cross section on fracture |
KCU\cdot 10^{3} | \frac{J}{m^2} | Impact toughness |