95NLM-VI (EI996M)
The alloy precipitation hardens corrosion with low specific resistivity ≤0.42 Ohm mm 2 / m.
Used for the production of the tape, sanded rods (silverfish) and wire for the manufacture of a conductive and elastic force sensing elements Aviapribor and other devices operating at temperatures up to 300 ° C.
Classification
| Country | Section | Category |
|---|---|---|
| CIS, Russia, Ukraine | Precision alloys | With preset elastic properties |
Chemical composition
| Standard | Fe, % | Si, % | B, % | Be, % | Ca, % | Mn, % | Ni, % | P, % | C, % | S, % | Mo, % |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-436-72 | < 0.3 | < 0.2 | < 0.0025 | 2–2.4 | < 0.05 | < 0.2 | 90.7775–93 | < 0.01 | < 0.05 | < 0.01 | 5–6 |
Information on suppliers
Mechanical properties at 20 °C
| Rolling | Standard | Size, mm | Tension | Classifiers | $$\sigma _{U}$$, $$MPa$$ | $$\sigma_{0.2}$$, $$MPa$$ | δ, % | d5, % | Treatment |
|---|---|---|---|---|---|---|---|---|---|
| Tape | TU 14-1-436-72 | < 1079 | < 589 | > 25 | Tape according to TU 14-1-436-72 after quenching in water with 1080 ± 10 ° C | ||||
| Tape | TU 14-1-436-72 | > 1373 | > 1030 | > 15 | |||||
| Tape | TU 14-1-436-72 | > 1864 | > 1472 | > 11 | Tape according to TU 14-1-436-72 after quenching in water with 1080 ± 10 ° C, 35% slander and dispersion hardening at 550 ± 10 ° C (extraction 1.5-2.0 h) | ||||
| Wire | TU 14-1-436-72 | > 1080 | > 7 | Tape according to TU 14-1-436-72 after quenching in water with 1080 ± 10 ° C, 35% slander and dispersion hardening at 550 ± 10 ° C (extraction 1.5-2.0 h) |
Standards
| Standard | Description |
|---|---|
| TU 14-1-436-72 |
Description of chemical elements
| Element | Units of measurement | Description |
|---|---|---|
| Fe | % | Iron |
| Si | % | Silicon |
| B | % | Bor |
| Be | % | Beryllium |
| Ca | % | Calcium |
| Mn | % | Manganese |
| Ni | % | Nickel |
| P | % | Phosphorus |
| C | % | Carbon |
| S | % | Sulfur |
| Mo | % | Molybdenum |
Description of mechanical properties
| Parameter | Units of measurement | Description |
|---|---|---|
| δ | % | Elongation after rupture |
| d5 | % | Elongation at break |
| $$\sigma_{0.2}$$ | $$MPa$$ | Tensile stress required to produce a total elongation of 0.2% |
| $$\sigma _{U}$$ | $$MPa$$ | Ultimate tensile strength |