A35E
For hammer stamps, bandages and matrices.
Classification
| Country |
Section |
Category |
| CIS, Russia, Ukraine |
Structural steel |
Improved machinability structural steel |
Chemical composition
| Standard |
Fe, % |
Si, % |
Mn, % |
Cr, % |
Cu, % |
Ni, % |
P, % |
C, % |
S, % |
Se, % |
|---|
| GOST 1414-75 |
97.42–98.91 |
0.17–0.37 |
0.5–0.8 |
< 0.25 |
< 0.25 |
< 0.25 |
< 0.04 |
0.32–0.4 |
0.06–0.12 |
0.04–0.1 |
Information on suppliers
Physical characteristics
| Temperature, °C |
$$\rho$$, $$\frac{kg}{m^3}$$ |
|---|
| 20 |
7830 |
Mechanical properties at 20 °C
| Rolling |
Standard |
Size, mm |
Tension |
Classifiers |
$$\sigma _{U}$$, $$MPa$$ |
$$\sigma_{P}$$, $$MPa$$ |
d5, % |
Treatment |
|---|
| Alloy |
|
|
|
|
540 |
320 |
20 |
|
Brinell hardness number
| Rolling |
Standard |
Classifiers |
Value, HBW |
| Alloy |
|
hot rolling |
187 |
| Alloy |
|
calibrated, cold-work |
229 |
Analogues
| USA |
Germany |
Bulgaria |
|---|
| G11400 |
35S20 |
А35 |
Standards
Description of chemical elements
| Element |
Units of measurement |
Description |
| Fe |
% |
Iron |
| Si |
% |
Silicon |
| Mn |
% |
Manganese |
| Cr |
% |
Chrome |
| Cu |
% |
Copper |
| Ni |
% |
Nickel |
| P |
% |
Phosphorus |
| C |
% |
Carbon |
| S |
% |
Sulfur |
| Se |
% |
Selenium |
Description of physical characteristics
| Parameter |
Units of measurement |
Description |
| $$\rho$$ |
$$\frac{kg}{m^3}$$ |
The density of the material |
Description of mechanical properties
| Parameter |
Units of measurement |
Description |
| d5 |
% |
Elongation at break |
| $$\sigma _{U}$$ |
$$MPa$$ |
Ultimate tensile strength |
| $$\sigma_{P}$$ |
$$MPa$$ |
Proportionality limit |