ASF-2
to work in tandem with heat treated (tempered or normalized) shaft
to work in tandem with heat treated (tempered or normalized) shaft
| Standard | Fe, % | Si, % | Mn, % | Cr, % | Ti, % | Cu, % | Ni, % | P, % | C, % | S, % |
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Fe, % | Si, % | Mn, % | Cr, % | Ti, % | Cu, % | Ni, % | P, % | C, % | S, % |
| GOST 1585-85 | 90.88–94.52 | 1.4–2.2 | 0.3–1 | 0.2–0.5 | 0.03–0.1 | 0.2–0.5 | 0.2–0.5 | 0.15–0.4 | 3–3.8 | < 0.12 |
| Rolling | Standard | Classifiers | Value, HBW |
|---|---|---|---|
| Rolling | Standard | Classifiers | Value, HBW |
| GOST 1585-85 | 180–229 |
| Standard | Нагрузка, $$\textit{MPa}$$ | Скорость, $$\frac{m}{s}$$ | Нагрузка * Скорость, $$MPa * m/s$$ |
|---|---|---|---|
| Standard | Нагрузка, $$\textit{MPa}$$ | Скорость, $$\frac{m}{s}$$ | Нагрузка * Скорость, $$MPa * m/s$$ |
| GOST 1585-85 | 10 | 0.3 | 2.5 |
| GOST 1585-85 | 0.1 | 3 | 0.3 |
| Standard | Description |
|---|---|
| Standard | Description |
| GOST 1585-85 |