ASM

For obtaining bimetallic strip steel by rolling and subsequent punching of liners with a thickness of friction layer is less than 0.5 mm.

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Aluminum, aluminum alloys	Antifriction aluminum alloy

Chemical composition

Standard	Fe, %	Si, %	Mg, %	Mn, %	Cu, %	Zn, %	Sb, %	Al, %
Standard	Fe, %	Si, %	Mg, %	Mn, %	Cu, %	Zn, %	Sb, %	Al, %
GOST 14113-78	< 0.75	< 0.5	0.3–0.7	< 0.2	< 0.1	< 0.1	3.5–6.5	91.05–96.2

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$\rho$ , $\frac{kg}{m^3}$
Temperature, °C	$\rho$ , $\frac{kg}{m^3}$
20	2830

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{P}$ , $MPa$	$\epsilon_L$ , %	$\psi$ , %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{P}$ , $MPa$	$\epsilon_L$ , %	$\psi$ , %	Treatment
Alloy					85–95	32–46	30–38	45–52

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
		hot rolling, annealing	220–260
Tape		annealing	220–300

Standards

Standard	Description
Standard	Description
GOST 14113-78

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Mg	%	Magnesium
Mn	%	Manganese
Cu	%	Copper
Zn	%	Zinc
Sb	%	Antimony
Al	%	Aluminium

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\rho$	$\frac{kg}{m^3}$	The density of the material

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\sigma_{P}$	$MPa$	Proportionality limit
$\epsilon_L$	%	Elongation at break (longitudinal)
$\psi$	%	Reduction in cross section on fracture