BrO10Ts2 (BrOTs10-2)

fittings, anti-friction parts, bearings, parts and friction lining of the propeller shafts

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Bronze	Tin cast bronze

Chemical composition

Standard	Fe, %	Si, %	Sn, %	Cu, %	Zn, %	Sb, %	Al, %	Pb, %	P, %
Standard	Fe, %	Si, %	Sn, %	Cu, %	Zn, %	Sb, %	Al, %	Pb, %	P, %
GOST 613-79	< 0.3	< 0.02	9–11	85–90	1–3	< 0.3	< 0.02	< 0.5	< 0.05

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$	$c\cdot 10^{-3}$ , $\frac{J}{kg\cdot K}$	$R\cdot 10^{-6}$ , $\Omega\cdot m$
Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$	$c\cdot 10^{-3}$ , $\frac{J}{kg\cdot K}$	$R\cdot 10^{-6}$ , $\Omega\cdot m$
20	98	17.3	55.3	8500	0.381	0.155

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
Casting	GOST 613-79			in chill mold	225	10	Without termoobrabot.
Casting	GOST 613-79			in sandy form	215	10	Without termoobrabot.

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
Casting	GOST 613-79	in chill mold	75
Casting	GOST 613-79	in sandy form	65

Casting and technological parameters

melting point, °C	linear shrinkage, %	the temperature of the casting, °C
melting point, °C	linear shrinkage, %	the temperature of the casting, °C
1015	1.48	1120–1150

Coefficients of Friction

coefficient of friction with lubrication	coefficient of friction without lubrication
coefficient of friction with lubrication	coefficient of friction without lubrication
0.034	0.18

Analogues

Germany	USA
Germany	USA
2.1087	C90500

Standards

Standard	Description
Standard	Description
GOST 613-79

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Sn	%	Tin
Cu	%	Copper
Zn	%	Zinc
Sb	%	Antimony
Al	%	Aluminium
Pb	%	Lead
P	%	Phosphorus

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$E\cdot 10^{9}$	$MPa$	Elastic modulus
$\alpha\cdot 10^{6}$	$K^{-1}$	Coefficient of thermal (linear) expansion (range 20°C–T)
$\varkappa$	$\frac{W}{m\cdot K}$	Coefficient of thermal conductivity (the heat capacity of the material)
$\rho$	$\frac{kg}{m^3}$	The density of the material
$c\cdot 10^{-3}$	$\frac{J}{kg\cdot K}$	The specific heat of the material (range 20°C–T)
$R\cdot 10^{-6}$	$\Omega\cdot m$	Electrical resistivity

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_L$	%	Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
melting point	°C	The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
linear shrinkage	%	The difference between model dimensions and the model casting
the temperature of the casting	°C	The temperature of the molten polymer is extruded from the heating cylinder into the mold