CuSn5Zn5Pb5 (BrOTsS5-5-5)

fittings, anti-friction parts, bearing shells

Classification

Country Section Category
CIS, Russia, Ukraine Bronze Tin cast bronze

Chemical composition

Standard Fe, % Si, % Sn, % Cu, % Zn, % Sb, % Al, % Pb, % P, %
GOST 613-79 < 0.4 < 0.05 4–6 80.7–88 4–6 < 0.5 < 0.05 4–6 < 0.1

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$
20 92.6 19.1 8800 0.393

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
Round 200–240 15–20
Casting GOST 613-79 in chill mold 176 4 Without termoobrabot.
Casting GOST 613-79 in sandy form 147 6 Without termoobrabot.

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Alloy GOST 613-79 60
Round 65–70

Casting and technological parameters

linear shrinkage, % the temperature of the casting, °C
1.5 1250–1300

Coefficients of Friction

coefficient of friction with lubrication coefficient of friction without lubrication
0.016 0.26

Analogues

Germany USA
2.1097 C83600
2.1097

Standards

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Sn % Tin
Cu % Copper
Zn % Zinc
Sb % Antimony
Al % Aluminium
Pb % Lead
P % Phosphorus

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
linear shrinkage % The difference between model dimensions and the model casting
the temperature of the casting °C The temperature of the molten polymer is extruded from the heating cylinder into the mold