E109
MPa
α106
K1
ϰ
WmK
ρ
kgm3
c103
JkgK
R106
Ωm
σU
MPa
ϵL

BrO8Ts4 (BrOTs8-4)

valves, pipe fittings, pumps, working in sea water

Classification

Country Section Category
CIS, Russia, Ukraine Bronze Tin cast bronze

Chemical composition

Standard Fe, % Si, % Sn, % Cu, % Zn, % Sb, % Al, % Pb, % P, %
GOST 613-79 < 0.3 < 0.02 7–9 84–89 4–6 < 0.3 < 0.02 < 0.5 < 0.05

Information on suppliers

Physical characteristics

Temperature, °C E\cdot 10^{9}E109, MPaMPa \alpha\cdot 10^{6}α106, K^{-1}K1 \varkappaϰ, \frac{W}{m\cdot K}WmK \rhoρ, \frac{kg}{m^3}kgm3 c\cdot 10^{-3}c103, \frac{J}{kg\cdot K}JkgK R\cdot 10^{-6}R106, \Omega\cdot mΩm
20 98 16.6 68.2 8800 0.356 0.135

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}σU, MPaMPa \epsilon_LϵL, % Treatment
Casting GOST 613-79 in chill mold 196 10 Without termoobrabot.
Casting GOST 613-79 in sandy form 196 10 Without termoobrabot.

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Alloy GOST 613-79 75

Casting and technological parameters

melting point, °C linear shrinkage, % the temperature of the casting, °C
1000 1.47 1100–1150

Coefficients of Friction

coefficient of friction with lubrication coefficient of friction without lubrication
0.006 0.3

Analogues

USA
C90300

Standards

Standard Description
GOST 613-79

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Sn % Tin
Cu % Copper
Zn % Zinc
Sb % Antimony
Al % Aluminium
Pb % Lead
P % Phosphorus

Description of physical characteristics

Parameter Units of measurement Description
E\cdot 10^{9}E109 MPaMPa Elastic modulus
\alpha\cdot 10^{6}α106 K^{-1}K1 Coefficient of thermal (linear) expansion (range 20°C–T)
\varkappaϰ \frac{W}{m\cdot K}WmK Coefficient of thermal conductivity (the heat capacity of the material)
\rhoρ \frac{kg}{m^3}kgm3 The density of the material
c\cdot 10^{-3}c103 \frac{J}{kg\cdot K}JkgK The specific heat of the material (range 20°C–T)
R\cdot 10^{-6}R106 \Omega\cdot mΩm Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
\sigma _{U}σU MPaMPa Ultimate tensile strength
\epsilon_LϵL % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point °C The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
linear shrinkage % The difference between model dimensions and the model casting
the temperature of the casting °C The temperature of the molten polymer is extruded from the heating cylinder into the mold