Cr20Ni80

for the manufacture of critical parts in-vacuum devices, electronic connectors technology products, for resistors nepretsizionnyh

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Precision alloys	With high electrical resistance

Chemical composition

Standard	Fe, %	Si, %	Mn, %	Cr, %	Ti, %	Ni, %	Al, %	P, %	C, %	S, %
Standard	Fe, %	Si, %	Mn, %	Cr, %	Ti, %	Ni, %	Al, %	P, %	C, %	S, %
GOST 10994-74	< 1.5	0.9–1.5	< 0.7	20–23	< 0.3	72.65–79.1	< 0.2	< 0.03	< 0.1	< 0.02

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\rho$ , $\frac{kg}{m^3}$	$R\cdot 10^{-6}$ , $\Omega\cdot m$
Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\rho$ , $\frac{kg}{m^3}$	$R\cdot 10^{-6}$ , $\Omega\cdot m$
20	218	17.6	8400	1.175

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
Wire				solid	620–680
Alloy				soft	400	50
Alloy				solid	770	14.5

Casting and technological parameters

melting point, °C	Hot working temperature, °C	annealing temperature, °C
melting point, °C	Hot working temperature, °C	annealing temperature, °C
1400	1250–100	870–1040

Analogues

Germany	USA
Germany	USA
CHRONITHERM 80 SPEZIAL	Nichrome V

Standards

Standard	Description
Standard	Description
GOST 10994-74

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Mn	%	Manganese
Cr	%	Chrome
Ti	%	Titan
Ni	%	Nickel
Al	%	Aluminium
P	%	Phosphorus
C	%	Carbon
S	%	Sulfur

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$E\cdot 10^{9}$	$MPa$	Elastic modulus
$\alpha\cdot 10^{6}$	$K^{-1}$	Coefficient of thermal (linear) expansion (range 20°C–T)
$\rho$	$\frac{kg}{m^3}$	The density of the material
$R\cdot 10^{-6}$	$\Omega\cdot m$	Electrical resistivity

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_L$	%	Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
melting point	°C	The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
Hot working temperature	°C	The temperature at which the plastic-deformed metal recrystallizes during the pressure treatment
annealing temperature	°C	The temperature at which the processes return recrystallization and homogenization of the metal to reduce its hardness for subsequent machining