H23YU5T

for heating elements with a maximum working temperature of 1400 degrees C in industrial and laboratory furnaces

Classification

Country Section Category
CIS, Russia, Ukraine Precision alloys With high electrical resistance

Chemical composition

Standard Si, % Ca, % Mn, % Cr, % Ti, % Ni, % Al, % Ce, % P, % C, % S, %
GOST 10994-74 < 0.5 < 0.1 < 0.3 22–24 0.2–0.5 < 0.6 5–5.8 < 0.1 < 0.03 < 0.05 < 0.015

Information on suppliers

Physical characteristics

Temperature, °C $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 7210 1.39
100 15 0.48

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
Tape 765 12

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Round 200–250

Casting and technological parameters

melting point, °C
1500

Standards

Standard Description
GOST 10994-74

Description of chemical elements

Element Units of measurement Description
Si % Silicon
Ca % Calcium
Mn % Manganese
Cr % Chrome
Ti % Titan
Ni % Nickel
Al % Aluminium
Ce % Cerium
P % Phosphorus
C % Carbon
S % Sulfur

Description of physical characteristics

Parameter Units of measurement Description
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point °C The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa