L80

Semi-finished products (belt, sheet, strip, wire); art products, manometer tube, hoses, musical instruments

Classification

Country Section Category
CIS, Russia, Ukraine Brass (copper-zinc alloy) Brass, pressure treated

Chemical composition

Standard Fe, % Bi, % Cu, % Zn, % Sb, % Pb, % P, %
GOST 15527-2004 < 0.1 < 0.002 79–81 18.7–21 < 0.005 < 0.03 < 0.01

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 110 142 8660 0.06
100 18.8 0.3994

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
Wire soft 290 25
Tape soft, cold rolling 260–370 40
Tape solid, cold rolling 390 3

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Sheet solid 0–0
Sheet soft 0–0

Casting and technological parameters

melting point, °C Hot working temperature, °C annealing temperature, °C
1000 700–850 500–650

Coefficients of Friction

coefficient of friction with lubrication coefficient of friction without lubrication
0.015 0.71
L80 / Aloro

Standards

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Bi % Bismuth
Cu % Copper
Zn % Zinc
Sb % Antimony
Pb % Lead
P % Phosphorus

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point °C The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
Hot working temperature °C The temperature at which the plastic-deformed metal recrystallizes during the pressure treatment
annealing temperature °C The temperature at which the processes return recrystallization and homogenization of the metal to reduce its hardness for subsequent machining