LAZH60-1-1

Pipes, bars for sliding bearings, shipbuilding and instrument

Classification

Country Section Category
CIS, Russia, Ukraine Brass (copper-zinc alloy) Brass, pressure treated

Chemical composition

Standard Fe, % Bi, % Mn, % Cu, % Zn, % Sb, % Al, % Pb, % P, %
GOST 15527-2004 0.75–1.5 < 0.002 0.1–0.6 58–61 34.7–40.4 < 0.005 0.7–1.5 < 0.4 < 0.01

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 105 75.3 8300 0.09
100 21.6

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
Round compacting 440 18
Alloy soft 400–450 45–55
Alloy solid 700–750 7–10

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Alloy soft 450–550
Alloy solid 1650–1750

Casting and technological parameters

melting point, °C Hot working temperature, °C annealing temperature, °C
904 600–800 600–650

Analogues

USA
SB 283 (C67500)

Standards

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Bi % Bismuth
Mn % Manganese
Cu % Copper
Zn % Zinc
Sb % Antimony
Al % Aluminium
Pb % Lead
P % Phosphorus

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point °C The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
Hot working temperature °C The temperature at which the plastic-deformed metal recrystallizes during the pressure treatment
annealing temperature °C The temperature at which the processes return recrystallization and homogenization of the metal to reduce its hardness for subsequent machining