LKS65-1.5-3

Melting point: 870 ° C, temperature casting: 970 — 1000 ° C. Linear shrinkage: 1.7% .

Coefficient of friction with lubrication: 0.012. Friction coefficient without lubrication: 0.32 .

Hardness HB 10 ^-1 = 80−160 MPa

for the manufacture of parts exposed to friction

Country	Section	Category
CIS, Russia, Ukraine	Brass (copper-zinc alloy)	Brass, pressure treated

Standard	Fe, %	Si, %	Sn, %	Bi, %	Cu, %	Zn, %	Ni, %	Sb, %	Pb, %	P, %
	< 0.15	1–2	< 0.2	< 0.002	63.5–66.5	27.5–33	< 0.1	< 0.005	2.5–3.5	< 0.01

Temperature, °C	$$E\cdot 10^{9}$$, $$MPa$$	$$\rho$$, $$\frac{kg}{m^3}$$
20	98	8500

Rolling	Standard	Size, mm	Tension	Classifiers	$$\sigma _{U}$$, $$MPa$$	$$\epsilon_L$$, %	Treatment
Alloy				Cast	300	15–20
Alloy				deformation	700	8

Rolling	Standard	Classifiers	Value, HBW
			0–0
Alloy		deformation	0–0

melting point, °C	linear shrinkage, %	the temperature of the casting, °C
870	1.7	970–1000

coefficient of friction with lubrication	coefficient of friction without lubrication
0.012	0.32

Parameter	Units of measurement	Description
$$E\cdot 10^{9}$$	$$MPa$$	Elastic modulus
$$\rho$$	$$\frac{kg}{m^3}$$	The density of the material

Parameter	Units of measurement	Description
$$\sigma _{U}$$	$$MPa$$	Ultimate tensile strength
$$\epsilon_L$$	%	Elongation at break (longitudinal)

Parameter	Units of measurement	Description
melting point	°C	The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
linear shrinkage	%	The difference between model dimensions and the model casting
the temperature of the casting	°C	The temperature of the molten polymer is extruded from the heating cylinder into the mold