LO62-1
Sheets, strips; plate for tube sheet; rods for instrument; tubes for condensers and heat exchangers
Sheets, strips; plate for tube sheet; rods for instrument; tubes for condensers and heat exchangers
Standard | Fe, % | Sn, % | Bi, % | Cu, % | Zn, % | Sb, % | Pb, % | P, % |
---|---|---|---|---|---|---|---|---|
Standard | Fe, % | Sn, % | Bi, % | Cu, % | Zn, % | Sb, % | Pb, % | P, % |
GOST 15527-2004 | < 0.1 | 0.7–1.1 | < 0.002 | 61–63 | 35.6–38.3 | < 0.005 | < 0.1 | < 0.01 |
Temperature, °C | E\cdot 10^{9}, MPa | \alpha\cdot 10^{6}, K^{-1} | \varkappa, \frac{W}{m\cdot K} | \rho, \frac{kg}{m^3} | R\cdot 10^{-6}, \Omega\cdot m |
---|---|---|---|---|---|
Temperature, °C | E\cdot 10^{9}, MPa | \alpha\cdot 10^{6}, K^{-1} | \varkappa, \frac{W}{m\cdot K} | \rho, \frac{kg}{m^3} | R\cdot 10^{-6}, \Omega\cdot m |
20 | 105 | 108.9 | 8500 | 0.078 | |
100 | 19.3 |
Standard | Description |
---|---|
Standard | Description |
GOST 15527-2004 | |
GOST 15527-70 | |
GOST 2060-90 | |
GOST 2060-2006 | GOST |
GOST 2208-07 | |
GOST 6688-16 | |
DSTU GOST 15527:2005 | |
DSTU GOST 2208:2008 |
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
E\cdot 10^{9} | MPa | Elastic modulus |
\alpha\cdot 10^{6} | K^{-1} | Coefficient of thermal (linear) expansion (range 20°C–T) |
\varkappa | \frac{W}{m\cdot K} | Coefficient of thermal conductivity (the heat capacity of the material) |
\rho | \frac{kg}{m^3} | The density of the material |
R\cdot 10^{-6} | \Omega\cdot m | Electrical resistivity |
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
melting point | °C | The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa |
Hot working temperature | °C | The temperature at which the plastic-deformed metal recrystallizes during the pressure treatment |
annealing temperature | °C | The temperature at which the processes return recrystallization and homogenization of the metal to reduce its hardness for subsequent machining |