LTS30A3

Brass aluminum. Melting point 995 ° C. Hardness (GOST 17711−93) HB 10 -1 = 80−90 MPa.

For the manufacture of corrosion resistant components used in mechanical engineering and shipbuilding

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Brass (copper-zinc alloy)	Foundry brass

Chemical composition

Standard	Fe, %	Si, %	Sn, %	Mn, %	Cu, %	Zn, %	Ni, %	Sb, %	Al, %	Pb, %	P, %
Standard	Fe, %	Si, %	Sn, %	Mn, %	Cu, %	Zn, %	Ni, %	Sb, %	Al, %	Pb, %	P, %
GOST 17711-93	< 0.8	< 0.3	< 0.7	< 0.5	66–68	26.4–32	< 0.3	< 0.1	2–3	< 0.7	< 0.05

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$	$R\cdot 10^{-6}$ , $\Omega\cdot m$
Temperature, °C	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$	$R\cdot 10^{-6}$ , $\Omega\cdot m$
20	113	8500	0.08

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
Casting	GOST 17711-93			in chill mold	392	15
Casting	GOST 17711-93			in sandy form	294	12

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
Casting	GOST 17711-93	in chill mold	0–0
Casting	GOST 17711-93	in sandy form	0–0

Casting and technological parameters

melting point, °C
melting point, °C
995

Standards

Standard	Description
Standard	Description
GOST 17711-93

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Sn	%	Tin
Mn	%	Manganese
Cu	%	Copper
Zn	%	Zinc
Ni	%	Nickel
Sb	%	Antimony
Al	%	Aluminium
Pb	%	Lead
P	%	Phosphorus

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\varkappa$	$\frac{W}{m\cdot K}$	Coefficient of thermal conductivity (the heat capacity of the material)
$\rho$	$\frac{kg}{m^3}$	The density of the material
$R\cdot 10^{-6}$	$\Omega\cdot m$	Electrical resistivity

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_L$	%	Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
melting point	°C	The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa