M3r
For rolled products, copper based alloys and other cast alloys.
For rolled products, copper based alloys and other cast alloys.
Standard | Fe, % | Sn, % | Bi, % | Cu, % | Ni, % | Sb, % | Pb, % | As, % | P, % | S, % | O, % |
---|---|---|---|---|---|---|---|---|---|---|---|
GOST 859-2001 | < 0.05 | < 0.05 | < 0.003 | > 99.5 | < 0.2 | < 0.05 | < 0.03 | < 0.05 | 0.005–0.06 | < 0.01 | < 0.01 |
Rolling | Standard | Size, mm | Tension | Classifiers | $$\sigma _{U}$$, $$MPa$$ | d5, % | Treatment |
---|---|---|---|---|---|---|---|
Pipes are pressed. | GOST 617-2006 | 180–190 | 32 | ||||
The alloy is soft | GOST 1173-2006 | cold rolling | 200–260 | 42 | |||
Alloy hard | GOST 1173-2006 | cold rolling | 290 | 6 |
Rolling | Standard | Classifiers | Value, HBW |
---|---|---|---|
The alloy is soft | GOST 1173-2006 | 55 | |
Alloy hard | GOST 1173-2006 | 95 |
Standard | Description |
---|---|
GOST 859-2001 | GOST 859 - 2001 |
GOST 1535-2006 | GOST 1535-2006 |
GOST 1173-2006 | GOST 1173-2006 |
GOST 617-2006 | GOST 617-2006 |
GOST 1018-15 | |
GOST 859-14 | |
TU 1844-106-069-2000 | |
TU 48-21-427-80 | |
TU 48-21-416-74 | |
DSTU GOST 1173:2007 | |
DSTU GOST 1535:2007 | |
DSTU GOST 617:2007 | |
DSTU GOST 859:2003 |
Parameter | Units of measurement | Description |
---|---|---|
$$E\cdot 10^{9}$$ | $$MPa$$ | Elastic modulus |
$$\alpha\cdot 10^{6}$$ | $$K^{-1}$$ | Coefficient of thermal (linear) expansion (range 20°C–T) |
$$\varkappa$$ | $$\frac{W}{m\cdot K}$$ | Coefficient of thermal conductivity (the heat capacity of the material) |
$$\rho$$ | $$\frac{kg}{m^3}$$ | The density of the material |
$$c\cdot 10^{-3}$$ | $$\frac{J}{kg\cdot K}$$ | The specific heat of the material (range 20°C–T) |
$$R\cdot 10^{-6}$$ | $$\Omega\cdot m$$ | Electrical resistivity |