MA2-1pch
for the manufacture of semi-hot deformation method; for the production of complex configuration of forgings for welded structures with extreme operating temperatures up to +150 ° C — for a long time, up to +200 ° C — momentarily.
Classification
| Country |
Section |
Category |
| CIS, Russia, Ukraine |
Magnesium |
Wrought Magnesium Alloys |
Chemical composition
| Standard |
Fe, % |
Si, % |
Be, % |
Mg, % |
Mn, % |
Cu, % |
Zn, % |
Ni, % |
Al, % |
|---|
| GOST 14957-76 |
< 0.005 |
< 0.01 |
< 0.002 |
92.872–95.2 |
0.2–0.6 |
< 0.01 |
0.8–1.5 |
< 0.001 |
3.8–5 |
Information on suppliers
Physical characteristics
| Temperature, °C |
$$\rho$$, $$\frac{kg}{m^3}$$ |
|---|
| 20 |
1790 |
Mechanical properties at 20 °C
| Rolling |
Standard |
Size, mm |
Tension |
Classifiers |
$$\sigma _{U}$$, $$MPa$$ |
$$\sigma_{P}$$, $$MPa$$ |
$$\epsilon_L$$, % |
Treatment |
|---|
| Sheet |
|
|
|
annealing |
260 |
150–160 |
8–10 |
|
| Trumpet |
|
|
|
|
230 |
|
8 |
|
| Round |
|
|
|
|
245–255 |
145 |
5–8 |
|
| Sheet |
|
|
|
|
230–250 |
140 |
6–8 |
|
Standards
Description of chemical elements
| Element |
Units of measurement |
Description |
| Fe |
% |
Iron |
| Si |
% |
Silicon |
| Be |
% |
Beryllium |
| Mg |
% |
Magnesium |
| Mn |
% |
Manganese |
| Cu |
% |
Copper |
| Zn |
% |
Zinc |
| Ni |
% |
Nickel |
| Al |
% |
Aluminium |
Description of physical characteristics
| Parameter |
Units of measurement |
Description |
| $$\rho$$ |
$$\frac{kg}{m^3}$$ |
The density of the material |
Description of mechanical properties
| Parameter |
Units of measurement |
Description |
| $$\sigma _{U}$$ |
$$MPa$$ |
Ultimate tensile strength |
| $$\sigma_{P}$$ |
$$MPa$$ |
Proportionality limit |
| $$\epsilon_L$$ |
% |
Elongation at break (longitudinal) |