POSSu8-3

For tinning and soldering in the manufacture of electric lamp. antimony alloy

Classification

Country Section Category
CIS, Russia, Ukraine Tin, lead, babity Tin-lead solder

Chemical composition

Standard Fe, % Sn, % Bi, % Cu, % Zn, % Ni, % Sb, % Al, % Pb, % As, % S, %
GOST 21930-76 < 0.02 7–8 < 0.2 < 0.15 < 0.002 < 0.08 2–3 < 0.002 88.676–91 < 0.05 < 0.02

Information on suppliers

Physical characteristics

Temperature, °C $$\rho$$, $$\frac{kg}{m^3}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 10500 0.207

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % $$KCU\cdot 10^{3}$$, $$\frac{J}{m^2}$$ Treatment
Alloy GOST 21930-76 40 43 170

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Alloy GOST 21930-76 128

Casting and technological parameters

melting point, solidus, °C melting point, liquidus, °C
240 290

Standards

Standard Description
GOST 21930-76

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Sn % Tin
Bi % Bismuth
Cu % Copper
Zn % Zinc
Ni % Nickel
Sb % Antimony
Al % Aluminium
Pb % Lead
As % Arsenic
S % Sulfur

Description of physical characteristics

Parameter Units of measurement Description
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)
$$KCU\cdot 10^{3}$$ $$\frac{J}{m^2}$$ Impact toughness

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point, solidus °C The temperature at which melts the low melting component
melting point, liquidus °C The temperature at which equilibrium falls first crystal