St-10HMFT (H-51)

Welding cold drawn wire of stainless steel, for welding (welding) and the manufacture of electrodes

Classification

Country Section Category
CIS, Russia, Ukraine Materials for welding and soldering Steel welding wire

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ti, % Ni, % V, % P, % C, % S, % Mo, % N, %
GOST 2246-70 95.585–97.48 < 0.35 0.4–0.7 1.4–1.8 0.05–0.12 < 0.3 0.2–0.35 < 0.03 0.07–0.12 < 0.03 0.4–0.6 < 0.015

Information on suppliers

Properties

Property
Wire according to GOST 2246 Note Fluctuations in the tensile strength in one coil of wire with a diameter of more than 1.4 mm should not exceed 90 N / mm2.
For welding Diameter: 0.3 - 0.5 mm; Temporary resistance: 890 - 1390 MPa
Diameter: 0.8 - 1.5 mm; Temporary resistance: 890 - 1340 MPa
Diameter: 1.6mm; Temporary resistance: 890 - 1290 MPa
Diameter: 2mm; Temporary resistance: 790 - 1190 MPa
Diameter:> 2 mm; Temporary resistance: 690 - 1040 MPa
For the manufacture of electrodes Diameter: 1.6 mm; Temporary resistance: 690 - 990 MPa
Diameter: 2mm; Temporary resistance: 690 - 990 MPa
Diameter:> 2 mm; Temporary resistance: 640 - 940 MPa
Calculated Properties Density: 7.84 g / cm3

Standards

Standard Description
GOST 2246-70

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ti % Titan
Ni % Nickel
V % Vanadium
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum
N % Nitrogen