Sv-10HMFTU-A
Classification
Chemical composition
| Standard | Fe, % | Si, % | Sn, % | Mn, % | Co, % | Cr, % | Ti, % | Cu, % | Ni, % | Sb, % | V, % | Al, % | As, % | P, % | C, % | S, % | Mo, % | N, % |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-4818-2008 | 95.722–96.7 | 0.15–0.25 | < 0.001 | 0.5–0.7 | < 0.02 | 1.6–1.8 | 0.05–0.1 | < 0.06 | 0.2–0.25 | < 0.005 | 0.2–0.25 | < 0.015 | < 0.08 | < 0.006 | 0.1–0.12 | < 0.006 | 0.5–0.6 | < 0.015 |
Information on suppliers
Properties
| Property |
|---|
| According to TU 14-1-4818-2008 Note Fluctuations in the tensile strength in one coil of wire with a diameter of more than 1.4 mm should not exceed 90 N / mm2. |
| For welding Diameter: 0.3 - 0.5 mm; Temporary resistance: 890 - 1390 MPa |
| Diameter: 0.8 - 1.5 mm; Temporary resistance: 890 - 1340 MPa |
| Diameter: 1.6mm; Temporary resistance: 890 - 1290 MPa |
| Diameter: 2mm; Temporary resistance: 790 - 1190 MPa |
| Diameter:> 2 mm; Temporary resistance: 690 - 1040 MPa |
| For the manufacture of electrodes Diameter: 1.6 mm; Temporary resistance: 690 - 990 MPa |
| Diameter: 2mm; Temporary resistance: 690 - 990 MPa |
| Diameter:> 2 mm; Temporary resistance: 640 - 940 MPa |
| Calculated Properties Density: 7.85 g / cm3 |
Standards
| Standard | Description |
|---|---|
| TU 14-1-4818-2008 |