TSAM4-1 (TSA4M1)

Melting point: 380 — 386 ° C. Hardness TsAM4−1 HB 10 ^-1 = 90 MPa .

Injection molding of critical parts

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Metals and alloys	Zinc Foundry Alloys

Chemical composition

Standard	Fe, %	Si, %	Sn, %	Mg, %	Cu, %	Zn, %	Al, %	Pb, %	Cd, %
Standard	Fe, %	Si, %	Sn, %	Mg, %	Cu, %	Zn, %	Al, %	Pb, %	Cd, %
GOST 19424-97	< 0.05	< 0.015	< 0.002	0.03–0.06	0.7–1.2	94.36–95.77	3.5–4.3	< 0.01	< 0.005

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\rho$ , $\frac{kg}{m^3}$
Temperature, °C	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\rho$ , $\frac{kg}{m^3}$
20	27.4	6700

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\epsilon_L$ , %	Treatment
					300	1

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
			900

Casting and technological parameters

melting point, °C
melting point, °C
380–386

Standards

Standard	Description
Standard	Description
GOST 19424-97
DSTU 3586-97

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Sn	%	Tin
Mg	%	Magnesium
Cu	%	Copper
Zn	%	Zinc
Al	%	Aluminium
Pb	%	Lead
Cd	%	Cadmium

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\alpha\cdot 10^{6}$	$K^{-1}$	Coefficient of thermal (linear) expansion (range 20°C–T)
$\rho$	$\frac{kg}{m^3}$	The density of the material

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\epsilon_L$	%	Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
melting point	°C	The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa