TSV0

The hardness of the alloy alloy ЦВ0: HB 10 -1 = 30 — 40 MPa. The hardness of the deformed alloy ЦВ0: HB 10 -1 = 35 — 45 MPa

for the needs of the printing and automotive industries

Classification

Country Section Category
CIS, Russia, Ukraine Metals and alloys Zinc is the primary

Chemical composition

Standard Fe, % Sn, % Cu, % Zn, % Al, % Pb, % As, % Cd, %
GOST 3640-94 < 0.002 < 0.001 < 0.001 < 99.995 < 0.005 < 0.003 < 0.0005 < 0.002

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\rho$$, $$\frac{kg}{m^3}$$
20 95 7130
100 39.5

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ Treatment
Alloy Cast 120–140

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Alloy Cast 300–400
Alloy deformation 350–450

Casting and technological parameters

linear shrinkage, % the temperature of the casting, °C Hot working temperature, °C
1.57 430–450 150–170

Analogues

Germany USA
Zn99.995 B 6 (Z12002)

Standards

Standard Description
GOST 3640-94

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Sn % Tin
Cu % Copper
Zn % Zinc
Al % Aluminium
Pb % Lead
As % Arsenic
Cd % Cadmium

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength

Description of the casting and technological parameters

Parameter Units of measurement Description
linear shrinkage % The difference between model dimensions and the model casting
the temperature of the casting °C The temperature of the molten polymer is extruded from the heating cylinder into the mold
Hot working temperature °C The temperature at which the plastic-deformed metal recrystallizes during the pressure treatment