1.4568 (X7CrNiAl17-7)

Classification

Country Section Category
Germany Stainless and Heat Resisting Steels Stainless Steels with Special Additions

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Ni, % Al, % P, % C, % S, %
70.855–76.8 < 0.7 < 1 16–18 6.5–7.8 0.7–1.5 < 0.04 < 0.09 < 0.015

Information on suppliers

Physical characteristics

Temperature, °C E\cdot 10^{9}, MPa \alpha\cdot 10^{6}, K^{-1} \varkappa, \frac{W}{m\cdot K} \rho, \frac{kg}{m^3} c\cdot 10^{-3}, \frac{J}{kg\cdot K} R\cdot 10^{-6}, \Omega\cdot m
20 200 16 7800 0.5 0.8
100 13
200 13.5
300 14

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers \sigma _{U}, MPa \epsilon_L, % Treatment
solution annealing 850–1030 19

Brinell hardness number

Rolling Standard Classifiers Value, HBW
solution annealing 255

Analogues

CIS, Russia, Ukraine
09H17N7YU
DI-21

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Ni % Nickel
Al % Aluminium
P % Phosphorus
C % Carbon
S % Sulfur

Description of physical characteristics

Parameter Units of measurement Description
E\cdot 10^{9} MPa Elastic modulus
\alpha\cdot 10^{6} K^{-1} Coefficient of thermal (linear) expansion (range 20°C–T)
\varkappa \frac{W}{m\cdot K} Coefficient of thermal conductivity (the heat capacity of the material)
\rho \frac{kg}{m^3} The density of the material
c\cdot 10^{-3} \frac{J}{kg\cdot K} The specific heat of the material (range 20°C–T)
R\cdot 10^{-6} \Omega\cdot m Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
\sigma _{U} MPa Ultimate tensile strength
\epsilon_L % Elongation at break (longitudinal)