1.4742 (X10CrAl18)

Additive material 1.4820, 1.4773, 1.4829

Classification

Country Section Category
Germany Stainless and Heat Resisting Steels Heat Resistant Steels with Ni < 2.5%

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Al, % P, % C, % S, %
77.225–81.6 0.7–1.4 < 1 17–19 0.7–1.2 < 0.04 < 0.12 < 0.015

Information on suppliers

Physical characteristics

Temperature, °C $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 19 7700 0.5 0.93
400 11.5
800 12.5
1000 13.5

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{0.2}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
annealing, soft 500–700 270 13–15

Brinell hardness number

Rolling Standard Classifiers Value, HBW
annealing, soft 212

Analogues

CIS, Russia, Ukraine
15H18SYU (EI484)
EI484

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Al % Aluminium
P % Phosphorus
C % Carbon
S % Sulfur

Description of physical characteristics

Parameter Units of measurement Description
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma_{0.2}$$ $$MPa$$ Tensile stress required to produce a total elongation of 0.2%
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)