10X17H13M2T (EI448, X17H13M2T)

St. designs working in acidic environments. The most responsible devices and det. chemical, textile and rubber. prom-sti, izg. cellulose, as well as in photography, the production of paints, artificial resins, synth. rubber, isoprene, acetic to-you.

welded constructions, working in environments of increased aggressiveness, designed for long life at 600 ° C .; austenitic steel

Classification

Country Section Category
CIS, Russia, Ukraine Corrosion-resistant alloys and steels Corrosion-resistant ordinary steel

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Cu, % Ni, % P, % C, % S, % Mo, %
GOST 5632-72 61.745–70 < 0.8 < 2 16–18 < 0.3 12–14 < 0.035 < 0.1 < 0.02 2–3

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\rho$$, $$\frac{kg}{m^3}$$
20 206 7950
100 15.7
200 186 16.1
300 177 16.7
400 177 17.2
500 167 17.6
600 157 17.9
700 147 18.2

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{P}$$, $$MPa$$ $$\epsilon_L$$, % $$\psi$$, % Treatment
Pipes are coldly deformed. GOST 9941-81 529 35
Pipes are hot deformed. GOST 9940-81 529 35
Rod GOST 5949-75 60 510 215 40 55 Hardening of 1050-1100 ° C, air cooling
Wire GOST 18143-72 540–830 20–25
Forgings GOST 25054-81 < 1000 510 196 30–38 45–50 Hardening of 1050-1100 ° C, the water
The plates GOST 7350-77 530 235 37 Hardening of 1030-1080 ° C, air cooling
Sheet GOST 5582-75 530 225 38 Hardening of 1050-1080 ° C, air cooling
Sheet GOST 4986-79 530 20–40 Hardening of 1050-1080 ° C, air

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Forgings GOST 25054-81 200

Technological Properties

Weldability
no limits

Analogues

USA Germany
S31635 1.4571 (X6CrNiMoTi17-12-2)

Standards

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Cu % Copper
Ni % Nickel
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\sigma_{P}$$ $$MPa$$ Proportionality limit
$$\epsilon_L$$ % Elongation at break (longitudinal)
$$\psi$$ % Reduction in cross section on fracture

Designation of types of weldability

Parameter Units of measurement Description
no limits Welding is performed without heating and without subsequent heat treatment
Boundedly welded Welding is possible with heating up to 100–120 °C and subsequent heat treatment
Difficult to weld For obtaining quality welded joints, additional operations are required: heating up to 200–300 °C for welding, heat treatment after welding — annealing
Not applicable for welded structures